Clarke 07097A Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Sander Clarke 07097A. Clarke 07097A 8 páginas. 7" spinner edger ce
También para Clarke 07097A: Manual del usuario (20 páginas)

Imprimir página
Clarke 07097A Manual del usuario
Reassembly
1-Press uper bearing (71) on armature using the inner race only
2-Press bearing (76) and seal (75) in lower housing (8)
3-Press armature into the lower housing assembly
4-Reinstall pinion gear
5-Reinstall dust baffles
6-Reinstall the field housing assembly
Assembly Hints
Pinion and drive gears should always be replaced as sets
It is recommended that the upper and lower armature bearings be replace when installing a new armature
The dust baffles can be retained with super glue to keep them in place while reinstalling the field housing
assembly.
Fig. 28
Fig. 29
Fig. 30
56043143
Page 5