Clarke 07097A Kullanıcı Kılavuzu - Sayfa 5

Sander Clarke 07097A için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Clarke 07097A 8 sayfaları. 7" spinner edger ce
Ayrıca Clarke 07097A için: Operatör El Kitabı (20 sayfalar)

Sayfayı Yazdır
Clarke 07097A Kullanıcı Kılavuzu
Reassembly
1-Press uper bearing (71) on armature using the inner race only
2-Press bearing (76) and seal (75) in lower housing (8)
3-Press armature into the lower housing assembly
4-Reinstall pinion gear
5-Reinstall dust baffles
6-Reinstall the field housing assembly
Assembly Hints
Pinion and drive gears should always be replaced as sets
It is recommended that the upper and lower armature bearings be replace when installing a new armature
The dust baffles can be retained with super glue to keep them in place while reinstalling the field housing
assembly.
Fig. 28
Fig. 29
Fig. 30
56043143
Page 5