Clarke 6499642 Instrucciones de montaje y mantenimiento
Navegue en línea o descargue pdf Instrucciones de montaje y mantenimiento para Bomba de agua Clarke 6499642. Clarke 6499642 4 páginas. Strong chemical vane pump
Imprimir página
Strong Chemical Vane Pump
INTRODUCTION
Thank you for purchasing this CLARKE vane pump,
Suitable for use with strong corrosive chemicals such as acid (not suitable for use with nitric acid), alkali and water
based chemicals.
Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.
WARNING: THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT. THIS PRODUCT IS NOT
SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION OR AQUEOUS FLUIDS.
SAFETY
To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.
1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or
death.
2. Do NOT smoke near the pump or use the pump near an open flame. Fire could result.
3. When pumping flammable liquids, all equipment must be grounded to prevent the build up of static electricity
which may ignite vapours or gases.
SPECIFICATIONS
Barrel Adaptor Size
Max Flow
Inlet Tube Diameter
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12 months from the date of
purchase. Please keep your receipt which will be required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not
used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to us without prior
permission.
This guarantee does not effect your statutory rights.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
2" BSP
0.35l per rotation
27 mm
Outlet Tube Diameter
Dims (WxDxH)
Product Weight
MODEL NO: CVPS
PART NO:
PART NO: 6499642
19 mm
215 x 270 x 1325 mm
2.1 kg