Clarke 6499642 조립 및 유지보수 지침

{카테고리_이름} Clarke 6499642에 대한 조립 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke 6499642 4 페이지. Strong chemical vane pump

Strong Chemical Vane Pump

INTRODUCTION

Thank you for purchasing this CLARKE vane pump,

Suitable for use with strong corrosive chemicals such as acid (not suitable for use with nitric acid), alkali and water

based chemicals.

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully.

WARNING: THIS PRODUCT SHOULD NOT BE USED FOR FLUID TRANSFER INTO AIRCRAFT. THIS PRODUCT IS NOT

SUITABLE FOR USE WITH FLUIDS FOR HUMAN CONSUMPTION OR AQUEOUS FLUIDS.

SAFETY

To ensure safe and efficient operation, it is essential to read and follow each of these warnings and precautions.

1. When used to pump flammable liquids, improper use or installation of this product can cause serious bodily injury or

death.

2. Do NOT smoke near the pump or use the pump near an open flame. Fire could result.

3. When pumping flammable liquids, all equipment must be grounded to prevent the build up of static electricity

which may ignite vapours or gases.

SPECIFICATIONS

Barrel Adaptor Size

Max Flow

Inlet Tube Diameter

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

2" BSP

0.35l per rotation

27 mm

Outlet Tube Diameter

Dims (WxDxH)

Product Weight

MODEL NO: CVPS

PART NO:

PART NO: 6499642

19 mm

215 x 270 x 1325 mm

2.1 kg