Directed Electronics 440HP Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Arranque a distancia Directed Electronics 440HP. Directed Electronics 440HP 19 páginas. Directed electronics remote start alarm system owner's guide 440hp

Imprimir página

➜

disabling the system without a transmitter

If your remote transmitter is lost or damaged, you can manually

override the system. To do this, you must have the vehicle's igni-

tion key and know where the Valet

check with the installer for the location of the Valet

Location of Valet Button_________________________________

➜

silent mode

To temporarily turn off the arm or disarm chirps, use Silent

Mode™. Simply press

arming or disarming, and the confirmation chirp(s) will be elim-

inated for that one operation only. If you want the arm/disarm

chirps turned off permanently, your dealer can do this for you.

To disarm the security system,

the ignition to the ON posi-

tion. Press and release the

Valet

switch

seconds. The status LED will

stop flashing and the vehicle

should start. If the vehicle

does not start, you may have

waited too long; turn the ignition off and repeat the

process.

switch is located. Be sure to

within

for less than one second before

switch.

DRW-35

turn