Directed Electronics 440HP Panduan Pemilik - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Starter Jarak Jauh Directed Electronics 440HP. Directed Electronics 440HP 19 halaman. Directed electronics remote start alarm system owner's guide 440hp

Halaman Cetak

➜

disabling the system without a transmitter

If your remote transmitter is lost or damaged, you can manually

override the system. To do this, you must have the vehicle's igni-

tion key and know where the Valet

check with the installer for the location of the Valet

Location of Valet Button_________________________________

➜

silent mode

To temporarily turn off the arm or disarm chirps, use Silent

Mode™. Simply press

arming or disarming, and the confirmation chirp(s) will be elim-

inated for that one operation only. If you want the arm/disarm

chirps turned off permanently, your dealer can do this for you.

To disarm the security system,

the ignition to the ON posi-

tion. Press and release the

Valet

switch

seconds. The status LED will

stop flashing and the vehicle

should start. If the vehicle

does not start, you may have

waited too long; turn the ignition off and repeat the

process.

switch is located. Be sure to

within

for less than one second before

switch.

DRW-35

turn