Directed Electronics Failsafe 103T Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Arranque a distancia Directed Electronics Failsafe 103T. Directed Electronics Failsafe 103T 15 páginas. Failsafe starter kill
Imprimir página
4.
Within 5 seconds, enter the new PIN code followed
The LED will flash twice.
5.
Within 5 seconds, enter the new PIN code again followed by
. The LED will light solidly for 1 second.
The new PIN code has been programmed. The programming mode is
exited if the ignition is turned off or if there is no activity for more
than 5 seconds. If the PIN code programming mode is exited before
a new PIN code is set, the unit will default to the existing PIN code.
Operation as a
Stand-Alone Starter Kill
Arming
When armed, the 103T will interrupt the starter wire when any
attempt is made to start the vehicle. The 103T can be passively or
actively armed. Passive arming occurs automatically 15 seconds
after the ignition is turned off.
To actively arm the unit:
1.
Press
.
2.
Press
(labeled ARM on the keypad). The system will
arm immediately.
The LED will flash steadily to indicate that the system is armed.
2000 Directed Electronics, Inc.
©
.
5