Directed Electronics Failsafe 103T 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Directed Electronics Failsafe 103T에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Directed Electronics Failsafe 103T 15 페이지. Failsafe starter kill

Within 5 seconds, enter the new PIN code followed

The LED will flash twice.

Within 5 seconds, enter the new PIN code again followed by

. The LED will light solidly for 1 second.

The new PIN code has been programmed. The programming mode is

exited if the ignition is turned off or if there is no activity for more

than 5 seconds. If the PIN code programming mode is exited before

a new PIN code is set, the unit will default to the existing PIN code.

Operation as a

Stand-Alone Starter Kill

When armed, the 103T will interrupt the starter wire when any

attempt is made to start the vehicle. The 103T can be passively or

actively armed. Passive arming occurs automatically 15 seconds

after the ignition is turned off.

To actively arm the unit:

Press

(labeled ARM on the keypad). The system will

arm immediately.

The LED will flash steadily to indicate that the system is armed.

2000 Directed Electronics, Inc.