Claro GLIDER DC Manual de instalación - Página 12

Navegue en línea o descargue pdf Manual de instalación para Ventilador Claro GLIDER DC. Claro GLIDER DC 17 páginas.

MODELS WITH LIGHT:

a. Remove the 3 screws on light kit fixing plate.

b. Align the light kit with screw holes on light kit fixing plate, and secure it with the 3 screws.

c. Connect light plug.

d. Align groove in the diffuser with the ridge in the light kit and twist the diffuser clockwise until it is

secure. IMPORTANT: DO NOT overturn.

REVERSE FUNCTION:

The "Summer/Winter" reverse function is included in the remote control to make the fan rotate in

an anti-clockwise direction during summer.

In winter, this can be reversed, so that the blades now move in a clockwise direction.

CARE & CLEANING:

• Periodic cleaning (approximately 6 months) of your ceiling fan is the only maintenance required.

• Use a soft brush or lint free cloth to avoid scratching the finish. Please turn off electricity when you

do so.

• Do not use water when cleaning your ceiling fan. It could damage the motor or the wooden blades

and create the possibility of an electrical shock.

• The motor has a permanently lubricated ball bearing and as such, is maintenance free.

NOISE:

The manufacturer warranty covers actual faults that may develop, but NOT minor complaints, e.g.

motor operation noise - ALL ELECTRIC MOTORS ARE AUDIBLE TO SOME EXTENT; this is more

obvious when the fan is operating at low speeds.