CLAS HU 1108 Manual - Página 13
Navegue en línea o descargue pdf Manual para Equipos de servicio CLAS HU 1108. CLAS HU 1108 17 páginas. Mineral/multigrade oil electric clutch bleeder 5-20l 3.5bar
Imprimir páginaMINERAL/MULTIGRADE OIL ELECTRIC CLUTCH
HU 1108
BLEEDER 5-20L 3.5bar
INSTALLATION
Fasten the control unit to the chassis with
4 M8 screws. Fasten the pipe supports on
the left and right sides to the chassis with
2 M5 screws each.
CONCLUSION
If, after bleeding or fluid exchange, the clutch pedal actuation distance is too long or the pressure
build-up is too "soft", the clutch system must be bleeded again after several vigorous operations.
MAINTENANCE AND REPAIR
Repairs to the control unit may only be carried out by authorized service centers! The device is
designed so that, in the event of a fault, only the control unit needs to be sent for repair. In this
case :
- Unscrew the 2 fixing screws on the left and right sides of the control unit.
- Remove the control unit completely from the chassis.
- Send only this unit for repair!
Send the product only in suitable packaging. CLAS accepts no responsibility for any damage
caused in transit. Shipping costs are the responsibility of the sender.
DISPOSAL
The device can be returned to the manufacturer/distributor (shipping and transportation costs are
the responsibility of the sender), or it must be disposed of in accordance with legal and regulatory
waste disposal requirements.