Lenovo ThinkPad series Manual de instalación - Página 35

Navegue en línea o descargue pdf Manual de instalación para Escritorio Lenovo ThinkPad series. Lenovo ThinkPad series 46 páginas. Bluetooth laser mouse
También para Lenovo ThinkPad series: Aviso reglamentario (12 páginas), Aviso reglamentario (12 páginas), Manual de inicio rápido (1 páginas), Manual del usuario (48 páginas), Manual del usuario (17 páginas), Manual del usuario (42 páginas), Manual de garantía (38 páginas), Manual de implantación (26 páginas), Manual de seguridad y garantía (20 páginas), Manual rápido (2 páginas)

Imprimir página
Lenovo ThinkPad series Manual de instalación
Issue:
If PC Card device is installed, it prevents Standby by Lid Close
Cause:
Resolution:
1. Stop the PC Card device using Unplug or Eject Hardware located
2. Use Fn+F4 key to put the system into Standby mode.
1.5
The Screen flashes with random characters and patterns for a while when
resuming from Hibernation mode.
ThinkPad i Series 1200/1300
Models:
When resuming from Hibernation mode, the screen flashes with
Issue:
random characters and patterns on the screen for a while (within 0.5
second).
VGA Driver issue
Cause:
Resolution:
The screen resumes correctly appearance automatically.
1.6
Windows Media Player changes to window screen mode when using Power
Management.
Models:
All ThinkPad models
Windows Media Player is changed to window screen mode from full
Issue:
screen mode when the system enters Sleep mode or Hibernation mode.
Cause:
Windows Media Player's limitation
To return to full screen mode, Press ALT+ENTER.
Resolution:
1.7

Standby is not available if select USB printers are installed.

All ThinkPad models
Models:
If a USB printer is installed, it might prevent standby with an error
Issue:
message.
Hardware Limitation
Cause:
Resolution:
Disable USB Printer or Unplug the USB Printer.
To Disable USB Printer:
1. Click Start
2. Double-click System icon and click "Device Manager" tab
3. Click [+] USB Controller and double-click USB Printer
4. Select Disable and Click [OK]
You may also contact the manufacturer of your printer for an updated
driver.
on the SysTray
a. Double-click Unplug or Eject Hardware located on
SysTray
b. Select the device listed and Click [Stop]
c. Click [OK] to confirm to stop the device
d. When notified safe removal, click [OK] and remove the
device.
e. Close the Lid to put the system into Standby mode
Settings
Control Panel