Lenovo ThinkPad series 설치 매뉴얼 - 페이지 35

{카테고리_이름} Lenovo ThinkPad series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkPad series 46 페이지. Bluetooth laser mouse
Lenovo ThinkPad series에 대해서도 마찬가지입니다: 규정 고지 (12 페이지), 규정 고지 (12 페이지), 빠른 시작 매뉴얼 (1 페이지), 사용자 설명서 (48 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (42 페이지), 보증 매뉴얼 (38 페이지), 배포 매뉴얼 (26 페이지), 안전 및 보증 매뉴얼 (20 페이지), 빠른 매뉴얼 (2 페이지)

페이지 인쇄
Lenovo ThinkPad series 설치 매뉴얼
Issue:
If PC Card device is installed, it prevents Standby by Lid Close
Cause:
Resolution:
1. Stop the PC Card device using Unplug or Eject Hardware located
2. Use Fn+F4 key to put the system into Standby mode.
1.5
The Screen flashes with random characters and patterns for a while when
resuming from Hibernation mode.
ThinkPad i Series 1200/1300
Models:
When resuming from Hibernation mode, the screen flashes with
Issue:
random characters and patterns on the screen for a while (within 0.5
second).
VGA Driver issue
Cause:
Resolution:
The screen resumes correctly appearance automatically.
1.6
Windows Media Player changes to window screen mode when using Power
Management.
Models:
All ThinkPad models
Windows Media Player is changed to window screen mode from full
Issue:
screen mode when the system enters Sleep mode or Hibernation mode.
Cause:
Windows Media Player's limitation
To return to full screen mode, Press ALT+ENTER.
Resolution:
1.7

Standby is not available if select USB printers are installed.

All ThinkPad models
Models:
If a USB printer is installed, it might prevent standby with an error
Issue:
message.
Hardware Limitation
Cause:
Resolution:
Disable USB Printer or Unplug the USB Printer.
To Disable USB Printer:
1. Click Start
2. Double-click System icon and click "Device Manager" tab
3. Click [+] USB Controller and double-click USB Printer
4. Select Disable and Click [OK]
You may also contact the manufacturer of your printer for an updated
driver.
on the SysTray
a. Double-click Unplug or Eject Hardware located on
SysTray
b. Select the device listed and Click [Stop]
c. Click [OK] to confirm to stop the device
d. When notified safe removal, click [OK] and remove the
device.
e. Close the Lid to put the system into Standby mode
Settings
Control Panel