Lenovo ThinkStation P320 Tiny Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Escritorio Lenovo ThinkStation P320 Tiny. Lenovo ThinkStation P320 Tiny 48 páginas. Customer replaceable unit

Imprimir página

Lenovo ThinkStation P320 Tiny Manual del usuario

1. System Board

Chapter 3. Connecting to other devices

Attaching a Kensington-style cable lock

You can use a Kensington-style cable lock to secure your computer to a desk, table, or other non-permanent

fixture. The cable lock connects to the security-lock slot at the rear of your computer. Depending on the type

selected, the cable lock can be operated with a key or combination. The cable lock also locks the buttons

used to open the computer cover. This is the same type of lock used with many notebook computers. You

can order such a cable lock directly from Lenovo by searching for Kensington at:

https://support.lenovo.com

Figure 5. Kensington-style cable lock

Connecting to a Tiny-In-One monitor

Note: When installing the P320 Tiny computer to the Tiny-In-One (TIO) monitor, ensure that you use the

135W ac power adapter that comes with the computer.

The P320 Tiny computer works with its integrated graphics card by default when it is installed to the TIO

monitor. You can turn on or turn off the computer by pressing the power button on the TIO monitor. Any

other devices connected to TIO monitor function the same as they are connected to the computer.

To switch the primary video display output from the integrated graphics card to the discrete graphics card,

do the following:

1. Turn on or restart your computer.

2. Before Windows starts up, repeatedly press and release F1 or Fn+F1 (depending on the keyboard

settings) until the Setup Utility program opens. If a BIOS password has been set, enter the correct

password when prompted.

3. Locate the Select Active Video submenu and select PEG. Then press F10 to save changes and exit.

4. Connect the discrete-graphic-card connector on the computer with the DisplayPort or HDMI connector

of the TIO monitor using an applicable dongle.