Lenovo ThinkStation P320 Tiny Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Desktop Lenovo ThinkStation P320 Tiny. Lenovo ThinkStation P320 Tiny 48 halaman. Customer replaceable unit
Chapter 3. Connecting to other devices
Attaching a Kensington-style cable lock
You can use a Kensington-style cable lock to secure your computer to a desk, table, or other non-permanent
fixture. The cable lock connects to the security-lock slot at the rear of your computer. Depending on the type
selected, the cable lock can be operated with a key or combination. The cable lock also locks the buttons
used to open the computer cover. This is the same type of lock used with many notebook computers. You
can order such a cable lock directly from Lenovo by searching for Kensington at:
https://support.lenovo.com
Figure 5. Kensington-style cable lock
Connecting to a Tiny-In-One monitor
Note: When installing the P320 Tiny computer to the Tiny-In-One (TIO) monitor, ensure that you use the
135W ac power adapter that comes with the computer.
The P320 Tiny computer works with its integrated graphics card by default when it is installed to the TIO
monitor. You can turn on or turn off the computer by pressing the power button on the TIO monitor. Any
other devices connected to TIO monitor function the same as they are connected to the computer.
To switch the primary video display output from the integrated graphics card to the discrete graphics card,
do the following:
1. Turn on or restart your computer.
2. Before Windows starts up, repeatedly press and release F1 or Fn+F1 (depending on the keyboard
settings) until the Setup Utility program opens. If a BIOS password has been set, enter the correct
password when prompted.
3. Locate the Select Active Video submenu and select PEG. Then press F10 to save changes and exit.
4. Connect the discrete-graphic-card connector on the computer with the DisplayPort or HDMI connector
of the TIO monitor using an applicable dongle.
© Copyright Lenovo 2017, 2018
7