CTS EPS-3112 Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Interruptor CTS EPS-3112. CTS EPS-3112 19 páginas. Management layer 2 gigabit poe ethernet switch 8 poe ports 10/100/1000mbps rj-45 + 4 combo uplink ports (10/100/1000 mbps rj-45 and 100/1000mbps sfp slot)
Imprimir página
WARNING!
Please mount the Switch firmly in rack otherwise it may be fall and
cause the system damage and possible injury to personnel.
The Managed Switch can be mounted in an EIA standard-sized, 19-inch rack,
which can be placed in a wiring closet with other equipment. Rack mounting
brackets are provided to mount the Switch.
Procedure
1. Plan the rack position.
2. Attach the mounting racket on the switch's side anels (one on each
side) and secure them with the screws provided.
3. Align the Switch with mounting bracket into the selected mounting rail
position.
4. Then, use the screws provided with the equipment rack to mount the
switch into the selected mounting rails position carefully and firmly.
5. Please ensure that the ventilation holes are not blocked.
2.4 Power ON
The Managed Switch can be used with AC power supply 100-240 VAC, 50 – 60
Hz. The power switch is located at the rear of the unit adjacent to the power
connector.
After the Managed Switch is turned on, the Power LED indicators should light in
green.
Power Failure
14