Lenovo ThinkSystem DM240N Manual - Página 7
Navegue en línea o descargue pdf Manual para Servidor Lenovo ThinkSystem DM240N. Lenovo ThinkSystem DM240N 21 páginas. Hot-add a shelf, shelves, support for dg5000 and dg7000
También para Lenovo ThinkSystem DM240N: Manual de servicio (34 páginas), Instrucciones (3 páginas), Manual (7 páginas)
Imprimir página
Otherwise, go to the next step.
The reboot can take up to 15 minutes.
5. Repeat steps for the second controller module:
If your HA pair is
running...
ONTAP 9.7 or later
ONTAP 9.6
6. Verify that the non-dedicated ports on both controller modules are configured for storage use:
storage port show
You can enter the command on either controller module.
If your HA pair is running ONTAP 9.8 or later, the non-dedicated ports display
Mode
column.
If your HA pair is running ONTAP 9.7 or 9.6, the non-dedicated ports, which display
Is Dedicated?
column, also display
1.3.2. Prepare a DM7100F or DG7000 HA pair to hot-add a second shelf
If you have a DM7100F or DG7000 HA pair with one DM240N drive shelf that is cabled to one set of
RoCE-capable ports on each controller, you must recable the shelf (after you have installed the
additional RoCE-capable PCIe cards or I/O modules) across both sets of ports on each controller,
before hot-adding the second shelf.
Before you begin
• You must have met the system requirements.
Requirements for a hot-add
• You must have enabled the ports on the RoCE-capable PCIe cards or I/O modules you
installed.
Prepare non-dedicated RoCE-capable ports for a hot-add
4
Then...
a. Repeat step 3.
b. Go to step 6.
a. Repeat steps 3 and 4.
The first controller must have already completed
its reboot.
b. Go to step 6.
enabled
in the
State
column.
storage
in the
false
in the