Clas Ohlson V-9688 Manual del usuario
Navegue en línea o descargue pdf Manual del usuario para Cargador de batería Clas Ohlson V-9688. Clas Ohlson V-9688 5 páginas.
También para Clas Ohlson V-9688: Manual del usuario (4 páginas)
Battery Charger
Art.no. 18-5105
Model V-9688-UK
36-5105
Please read the entire instruction manual before use and save it for future reference. We reserve the right for any errors in text or images and for making any necessary
technical changes to this document. If you should have any questions concerning technical problems please contact our Customer Services.
Safety
•
Only charge rechargeable NiMH/Ni-CD batteries;
sizes R03, R6, R14, R20 or 6F22 (9 V).
•
NEVER try to recharge regular dry-cell batteries, alkaline batteries or non-
rechargeable batteries in the battery charger.
•
Never use a higher charging current than that which is recommended or
that is marked on the battery.
•
Always charge rechargeable batteries before using them for the first time
and top them up again every second month.
•
Observe the battery polarity markings on the charger.
•
Do not expose the charger to water or sources of excess heat.
•
Do not use the charger if the connection cable or power adaptor is damaged.
•
The charger is only intended for indoor use.
•
The batteries will become warm when charged, be careful when
removing them.
•
Only use the enclosed adaptor to power the charger.
•
Unplug the adaptor from the power point when the charger is not in use.
Functions
•
Used for quick charging Ni-MH batteries.
•
Charges e.g. R20 1200 mAh in two hours and 15 min, and 9000 mAh in
9 hours.
•
Compatible battery sizes: R03, R6, R14, R20 and 6F22 (9 V)
(6F22 (9 V) Timer-charged only).
•
Microprocessor controlled charging.
•
Negative delta-V cut off function (-ΔV).
•
Timer protects against overcharging.
•
Protected against short circuiting.
•
Reverse-polarity protected.
•
Bad battery indicator.
•
Outlet for charging devices with a USB connection (5 V, 500 mA).
•
Do not let children use the charger without supervision. It is not a toy.
Contents
•
Charger V-9688
•
230 V adaptor
•
Instruction manual
Charging
1.
Connect the adaptor to a power point and the DC plug to the charger.
2.
Insert 1 to 4 batteries (R03, R6, R14 or R20) according to the polarity
markings on the charger. Press them securely against the bottom.
9 V batteries (6F22) can be charged one or two at a time.
3.
The charger determines the correct charge automatically.
The display's icons graphically demonstrate the charging process.
Battery status:
Bad, Full,
Discharge or
Charge
USB status
4.
"CHARGE" is displayed when any battery is being charged.
The display will also illuminate as long as charging is in progress.
5.
When all batteries are charged "FULL" will be displayed.
6.
Disconnect the adaptor from the socket and remove the batteries when
charging is finished.
Incorrect batteries
Battery status: When charging commences the charger makes sure that all
the batteries are capable of being recharged and that none of them is inserted
incorrectly. If any of the batteries cannot be charged or are misaligned, "BAD"
will be shown and the icon for the corresponding battery will flash. Charging is
interrupted until the fault has been corrected (i.e. the defective battery has been
removed or realigned).
GREAT BRITAIN
customer service tel: 020 8247 9300 e-mail: [email protected]
internet: www.clasohlson.co.uk
V-9688
Capacity indicator for
9 V batteries (2 ×)
Capacity indicator for R03, R6, R14
and R20 batteries (4 ×)
Discharging
Discharging removes the memory effect from the batteries which are
not fully discharged and result in a diminished charging capacity.
1.
Connect the adaptor to a power point and the DC plug to the charger.
2.
Insert 1 to 4 batteries (R03, R6, R14 or R20) according to the polarity
markings on the charger. Press them securely against the bottom.
(9 V batteries (6F22) cannot be discharged).
Discharge button
LCD display
3.
Press the discharge button on left side of the display.
4.
"DISCHARGE" is shown and the blue background light is
illuminated as long as discharging is in progress.
5.
The battery icons flash as long as discharging is in
progress for any of the batteries.
6.
Charging starts automatically when the batteries are discharged.
USB connection
1.
The USB connection can only be used when the batteries
in charger are fully charged or if the charge is empty.
2.
The USB symbol will be lit when the charger's USB
connection is ready to use.
3.
Connect the USB device to be charged to the USB
outlet on the back of the charger.
Note: Power consumption cannot exceed 500 mA (5 V).
Disposal
Sort and recycle products where possible, instead of disposing
of them. All electronic products, batteries and packaging material
etc. should be sorted and processed according to local
environmental regulations.
Specifications
Operating voltage
Input Power
100–240 V AC, 50/60 Hz
Output Power 12 V DC, 1000 mA (centre positive)
Using the AC/DC adaptor: DC 12 V 1000 mA
Charging Current
Ni-MH capacity
R03: 500 mA
R03 1000 mAh
R6: 1300 mA
R6 2500 mAh
R14: 1300 mA
R14 2800 mAh
R14 4500 mAh
R20: 1300 mA
R20 2800 mAh
R20 9000 mAh
Discharge current
400 mA for R03, R6, R14 and R20
Detection method
-ΔV auto cut-off for R03, R6, R14, and
R20 batteries
Charging current 9 V
30 mA
Charge time 9 V
10 hours (timer controlled)
Compatible batteries
R03 500–1100 mAh
R6 1300–2700 mAh
R14 1300–4500 mAh
R20 1300–10000 mAh
9 V (6F22) 100–250 mAh
Note: The charging time can vary depending on the capacity and condition
of the battery.
Backlight
Charging time
2 hours
2 hours
2.25 hours
4 hours
2.25 hours
9 hours