Dirty hand 101172 Manual de instrucciones - Página 16

Navegue en línea o descargue pdf Manual de instrucciones para Generador portátil Dirty hand 101172. Dirty hand 101172 20 páginas. 800 rated watts/900 maximum watts portable power generator

Imprimir página
PROBLEM
No output from generator's AC receptacle.
• Engine speed too slow.
• Open or shorted wiring.
• Faulty capacitor.
• Open/shorted rotor or stator windings.
• Open rectifier.
Low output voltage with no load.
• Engine speed is too slow.
• Open rectifier.
• Faulty capacitor.
• Open/shorted rotor or stator windings.
• Alternator not magnetized.
High output voltage with no load.
• Faulty capacitor.
• Engine speed is too fast
Low output voltage under load.
• Open rectifier.
• Engine speed is too low at full load.
• Excessive load applied.
• Engine speed is too fast
Erratic output voltage.
• Dirty, corroded, or loose wiring.
• Unbalanced load applied.
Noisy operation.
• Loose generator or engine bolt.
• Short circuit in generator field or load.
• Faulty bearing.
16

Generator Troubleshooting

• Adjust engine speed. Requires qualified technician.
• Clean and reconnect all wiring.
• Replace capacitor.
• Replace stator windings.
• Test rectifier and replace if required.
• Adjust engine speed. Requires qualified technician.
• Test rectifier and replace if required.
• Replace capacitor.
• Replace stator windings.
• Re-magnetize the alternator.
• Replace capacitor.
• Adjust engine speed. Requires qualified technician.
• Test rectifier and replace if required.
• Adjust engine speed. Requires qualified technician.
• Reduce the applied load.
• Adjust engine speed. Requires qualified technician.
• Clean and reconnect all wiring.
• Remove all loads, then apply each individually to determine
which load is causing the erratic output. Do not reconnect
the faulty tool or appliance.
• Tighten all mountings.
• Test winding resistance, replace field winding if required, test
load devices for shorts, replace defective load device(s).
• Replace bearing.
SOLUTION