Discount Car Stereo A2D-CTS Manual de inicio rápido - Página 3

Navegue en línea o descargue pdf Manual de inicio rápido para Sistema de vídeo para coches Discount Car Stereo A2D-CTS. Discount Car Stereo A2D-CTS 6 páginas. Cadillac cts/srx with xm tuner

Imprimir página

Fig. 3

Pull radio forward to reveal connectors (See Fig. 4)

Fig. 4

Radio connectors

Disconnect 8-pin gray plug from radio (See Fig. 4) and connect to

installation harness 8-pin black connector (See Fig. 5).

Fig. 5

8-pin connector

Connect installation harness 8-pin black plug (See Fig. 6) to radio

chamber vacated in step 6

8-pin plug

Warning: Bose system radios may not be able to provide enough

current to power amplifier and module and as a result module will

randomly connect/disconnect. For these instanced the red

accessory wire (See Fig. 6a) must be used to connect module to an

alternate location by following alternate instructions below

From Fig. 6: Disconnect terminal  from  (default wiring). Connect

terminal  to terminal  (Terminal  not used). Route and connect

other end of accessory wire (See Fig. 6a) to

steering column inside driver's lower-dash kick panel. Panel is supported by

three screws at the bottom and three metal/plastic clips at the top. Tap

accessory wire to ignition harness brown

Fig. 6

ignition harness under

wire.

Fig. 6a