ARNOLD MCU 400 D Manual - Página 7

Navegue en línea o descargue pdf Manual para Controlador ARNOLD MCU 400 D. ARNOLD MCU 400 D 20 páginas. Mirrorball motorcontroller

Mirrorball Motorcontroller

Description of the device

Features

The Arnold Lichttechnik Mirrorball Motorcontroller is a mirror ball control system.
● Input voltage: Power adapter 12 V to 240 V AC, 50 Hz
● Power consumption: 10 W
● Control modes: DMX-512
● Rotation speed: 0,5 RPM
● Maximum load: 500 kg
● Onboard: OLED display for easy setup
● DMX channels: 1, 2 channels
● Connections: 5-pin DMX IN/THRU, 3-pin power IN, 4-pin motor OUT
● Housing: Metal & flame retardant plastic
● IP rating: IP20
● Dimensions: 129 x 105 x 105 mm (LxWxH)
● Weight: 0,8 kg
In order to be able to use this device, you need to purchase the 60450 – Mirrorball Motor
to 500kg DMX as well as the power cables listed below.
60450
– Mirrorball Motor to 500kg DMX
FL816
– FL81, XLR/M 4-pin > XLR/F 4-pin cable (6 m)
FL8110
– FL81, XLR/M 4-pin > XLR/F 4-pin cable (10 m)
FL8120
– FL81, XLR/M 4-pin > XLR/F 4-pin cable (20 m)

Front

01) OLED display + LED indicators and control buttons
POWER: If the LED is on, the power is on.
DMX OK: If the LED is on, DMX signal is present.
MANUAL: If the LED is on, Manual mode is active.
ERROR: If the LED is blinking, the current is too high. If the LED is on, the device will turn off to
prevent overload.
02) Transport handle
Ordercode: 60455
6
Fig. 01