ARNOLD MCU 400 D Manuale - Pagina 7

Sfoglia online o scarica il pdf Manuale per Controllore ARNOLD MCU 400 D. ARNOLD MCU 400 D 20. Mirrorball motorcontroller

Mirrorball Motorcontroller

Description of the device

The Arnold Lichttechnik Mirrorball Motorcontroller is a mirror ball control system.

● Input voltage: Power adapter 12 V to 240 V AC, 50 Hz

● Power consumption: 10 W

● Control modes: DMX-512

● Rotation speed: 0,5 RPM

● Maximum load: 500 kg

● Onboard: OLED display for easy setup

● DMX channels: 1, 2 channels

● Connections: 5-pin DMX IN/THRU, 3-pin power IN, 4-pin motor OUT

● Housing: Metal & flame retardant plastic

● IP rating: IP20

● Dimensions: 129 x 105 x 105 mm (LxWxH)

● Weight: 0,8 kg

In order to be able to use this device, you need to purchase the 60450 – Mirrorball Motor

to 500kg DMX as well as the power cables listed below.

60450

– Mirrorball Motor to 500kg DMX

FL816

– FL81, XLR/M 4-pin > XLR/F 4-pin cable (6 m)

FL8110

– FL81, XLR/M 4-pin > XLR/F 4-pin cable (10 m)

FL8120

– FL81, XLR/M 4-pin > XLR/F 4-pin cable (20 m)

01) OLED display + LED indicators and control buttons

●

POWER: If the LED is on, the power is on.

●

DMX OK: If the LED is on, DMX signal is present.

●

MANUAL: If the LED is on, Manual mode is active.

●

ERROR: If the LED is blinking, the current is too high. If the LED is on, the device will turn off to

prevent overload.

02) Transport handle

Ordercode: 60455

Fig. 01