3D Hobby Shop 57" Extra 330 SC Manual de montaje - Página 8

Navegue en línea o descargue pdf Manual de montaje para Juguete 3D Hobby Shop 57" Extra 330 SC. 3D Hobby Shop 57" Extra 330 SC 16 páginas.

Install the elevator half with the fiberglass joiner rod onto the stabilizer. Makes sure it flexes easily at

least 45 degrees up and 45 degrees down. Apply thin CA glue to the hinges, 2 large drops on each.

Place a generous amount of medium or thick CA into the joiner slot on the remaining elevator, and slide

the elevator into place on the stabilizer. Make sure it is aligned and flexes easily at least 45 degrees up

and down. Glue the hinges with thin CA.