3D Hobby Shop 57" Extra 330 SC 조립 설명서 - 페이지 8
{카테고리_이름} 3D Hobby Shop 57" Extra 330 SC에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Hobby Shop 57" Extra 330 SC 16 페이지.
페이지 인쇄8
Install the elevator half with the fiberglass joiner rod onto the stabilizer. Makes sure it flexes easily at
least 45 degrees up and 45 degrees down. Apply thin CA glue to the hinges, 2 large drops on each.
Place a generous amount of medium or thick CA into the joiner slot on the remaining elevator, and slide
the elevator into place on the stabilizer. Make sure it is aligned and flexes easily at least 45 degrees up
and down. Glue the hinges with thin CA.