Cubic PULSE 160 Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Acuarios Cubic PULSE 160. Cubic PULSE 160 17 páginas. Aquarium systems
También para Cubic PULSE 160: Manual del usuario (12 páginas)
Imprimir página
PULSE 160 USER GUIDE
3.1 SETTING THE WATER LEVEL
The aquarium has been designed to allow the internal water
level to be set at two different heights. The water's surface can
be brought to the top of the aquarium making it invisible to the
eye. In order to do this simply place the provided acrylic strip
inside the top of the filtration weir. (Fig.4)
When cleaning the tank, or adding/removing jellyfish, you may
find it easier to lower the water level slightly. This can be done
by removing the acrylic strip from the top of the weir. Please
take note that removing the acrylic strip will increase the
water level in the filtration chambers.
3.2 CONNECTING TO EXTERNAL DEVICES BY HOSE BARBS
To connect an external device, such as a canister filter or
chiller by soft hoses, attach the supplied hose barbs to the
barrel unions as shown in Fig. 5. Run two rubber hoses out of
the bottom of the filter section to your external unit via an
appropriately sized external pump.
08
FIG.4
FIG.5