CubuSynth Exhaust Manual de construcción - Página 8

Navegue en línea o descargue pdf Manual de construcción para Pedal de música CubuSynth Exhaust. CubuSynth Exhaust 12 páginas. Expander module for the engine
También para CubuSynth Exhaust: Manual del usuario (5 páginas)

Imprimir página

CubuSynth Engine - Build Guide

STEP 8

Control PCB

Now take the other PCB and fit it on top, so the shaft of the switch goes in the big hole and all

pins of the male headers are showing through their solder pads. Fit the nuts to the switch and

carefully turn the board around. Solder the Switch first, it will hold together the 2 PCBs while

soldering the pin headers on both sides (both PCBs).

STEP 9 (control PCB)

Resistors

4k7

47k

100k

After removing the nut from the switch and carefully taking apart the two PCBs, place and

solder the resistors on the control PCB as shown below.

Page 8

R135,R176,R221,R232

R138,R235

R227,R228

R147,R154,R155,R177,R217,R218,R219,R220,

R222,R223,R224,R225,R226,R233

PCB V1.1 Jul 2022