CubuSynth Exhaust Oluşturma Kılavuzu - Sayfa 8

Müzik Pedalı CubuSynth Exhaust için çevrimiçi göz atın veya pdf Oluşturma Kılavuzu indirin. CubuSynth Exhaust 12 sayfaları. Expander module for the engine
Ayrıca CubuSynth Exhaust için: Kullanıcı Kılavuzu (5 sayfalar)

Sayfayı Yazdır

CubuSynth Engine - Build Guide

STEP 8

Control PCB

Now take the other PCB and fit it on top, so the shaft of the switch goes in the big hole and all

pins of the male headers are showing through their solder pads. Fit the nuts to the switch and

carefully turn the board around. Solder the Switch first, it will hold together the 2 PCBs while

soldering the pin headers on both sides (both PCBs).

STEP 9 (control PCB)

Resistors

4k7

47k

100k

After removing the nut from the switch and carefully taking apart the two PCBs, place and

solder the resistors on the control PCB as shown below.

Page 8

R135,R176,R221,R232

R138,R235

R227,R228

R147,R154,R155,R177,R217,R218,R219,R220,

R222,R223,R224,R225,R226,R233

PCB V1.1 Jul 2022