CubuSynth VCFA Manual de construcción - Página 6
Navegue en línea o descargue pdf Manual de construcción para Pedal de música CubuSynth VCFA. CubuSynth VCFA 14 páginas. Multimode vcf with lp,hp and bp outputs and integrated vca
También para CubuSynth VCFA: Manual (5 páginas)
Imprimir páginaCubuSynth VCFA - Build Guide
STEP 4 (Main PCB)
IC sockets
3
2
Look for the dip-14 and dip-16 sockets.
Oriantation is important to know how to place the ICs later!
The place for the notch is marked on the PCB with a "D shape"
You can use tape to hold them in place, put the other PCB on
top or bend 2 pins of each socket inwards, so they don't fall
when turning the board around. Then solder everything.
STEP 5 (Main PCB)
Electrolytic capacitors
2
47u
Bend the legs of the two 47uf capacitors, so they form
a 90° angle, as shown here.
Then place them on the PCB with the white line on the
capacitor facing down towards the white mark on the
PCB. The longer leg of
the capacitor goes
through the hole
marked with "+"
Page 6
DIP14 socket
TL074
DIP16 socket
LM13700
C7,C6
PCB V1.2 Sept 2022