CubuSynth VCFA Руководство по сборке - Страница 6
Просмотреть онлайн или скачать pdf Руководство по сборке для Музыкальная педаль CubuSynth VCFA. CubuSynth VCFA 14 страниц. Multimode vcf with lp,hp and bp outputs and integrated vca
Также для CubuSynth VCFA: Руководство (5 страниц)
Печатать страницуCubuSynth VCFA - Build Guide
STEP 4 (Main PCB)
IC sockets
3
2
Look for the dip-14 and dip-16 sockets.
Oriantation is important to know how to place the ICs later!
The place for the notch is marked on the PCB with a "D shape"
You can use tape to hold them in place, put the other PCB on
top or bend 2 pins of each socket inwards, so they don't fall
when turning the board around. Then solder everything.
STEP 5 (Main PCB)
Electrolytic capacitors
2
47u
Bend the legs of the two 47uf capacitors, so they form
a 90° angle, as shown here.
Then place them on the PCB with the white line on the
capacitor facing down towards the white mark on the
PCB. The longer leg of
the capacitor goes
through the hole
marked with "+"
Page 6
DIP14 socket
TL074
DIP16 socket
LM13700
C7,C6
PCB V1.2 Sept 2022