Acoustic Energy AEGIS TWO Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Altavoces Acoustic Energy AEGIS TWO. Acoustic Energy AEGIS TWO 4 páginas. Floorstanding two-way loudspeaker

Imprimir página

AEGIS two manual

5/7/99 8:50 am

Page 3

Connection

Check that your ampliﬁer is switched off before

installing your loudspeakers. Failure to do so may

result in speaker or ampliﬁer damage.

Power Handling 20 – 120 watt

The diagram illustrates one loudspeaker only. The

Impedance 8 ohm

Serial Number

positive (ribbed) cable from the ampliﬁer positive (or

red) terminal should connect with the positive (red)

terminal on the loudspeaker. Similarly the negative

(smooth) cable should connect the ampliﬁer negative

DESIGNED AND ENGINEERED BY

ACOUSTIC ENERGY LIMITED, ENGLAND

MADE IN MALAYSIA

terminal (black) to the negative terminal (black) on the

loudspeaker.

After wiring up: Lower the volume to minimum,

switch on the ampliﬁer, select the signal source and

then raise the volume to the listening level required.

LEFT SPEAKER

MAIN

AMPLIFIER