Acoustic Energy AEGIS TWO Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki Acoustic Energy AEGIS TWO. Acoustic Energy AEGIS TWO 4 stron. Floorstanding two-way loudspeaker
Drukuj stronę
AEGIS two manual
5/7/99 8:50 am
Page 3
Connection
Check that your amplifier is switched off before
installing your loudspeakers. Failure to do so may
result in speaker or amplifier damage.
Power Handling 20 – 120 watt
The diagram illustrates one loudspeaker only. The
Impedance 8 ohm
Serial Number
positive (ribbed) cable from the amplifier positive (or
red) terminal should connect with the positive (red)
terminal on the loudspeaker. Similarly the negative
(smooth) cable should connect the amplifier negative
DESIGNED AND ENGINEERED BY
ACOUSTIC ENERGY LIMITED, ENGLAND
MADE IN MALAYSIA
terminal (black) to the negative terminal (black) on the
loudspeaker.
After wiring up: Lower the volume to minimum,
switch on the amplifier, select the signal source and
then raise the volume to the listening level required.
LEFT SPEAKER
MAIN
L
R
AMPLIFIER