Acoustic Energy Aego BT2 Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Altavoces Acoustic Energy Aego BT2. Acoustic Energy Aego BT2 12 páginas. Bluetooth loudspeaker
Imprimir página
p o W e r I n p u t
4
This is the connection to attach the supplied mains power adapter to. Do not
connect any mains adaptor that is not supplied with the Acoustic Energy BT2 as
this risks damage.
t o p pa n e l c o n t r o l s
The BT2 is controlled via a four position button that incorporates two indicator lights
to show the status of the unit at a given time.
p o W e r
5
The power button controls the power state of the BT2. Press and release the button
and the BT2 will power on and play a single tone to indicate it is switched on. If the
BT2 is switched on, pressing and holding the power button for three seconds will
power the BT2 off again and another tone will play to indicate this.
V o l u m e - / +
6
The left and right buttons control the volume level of the BT2 between minimum and
maximum levels. When you are listening to the aux input of the BT2, these controls
are the sole point of volume adjustment, if the level of the device connected is fixed.
If the connected device also has a volume control, you should ensure this is set to
maximum and that the volume is controlled on the BT2.
If you are connected to a Bluetooth device, the volume control will function
differently depending on the device you have connected. If you connect an Apple
device, the volume of the BT2 is wholly controlled by the volume of the connected
device. Adjusting the volume on the Apple device will adjust the volume of the BT2
between minimum and maximum.