Acoustic Energy Aego BT2 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Acoustic Energy Aego BT2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Energy Aego BT2 12 페이지. Bluetooth loudspeaker

p o W e r I n p u t

This is the connection to attach the supplied mains power adapter to. Do not

connect any mains adaptor that is not supplied with the Acoustic Energy BT2 as

this risks damage.

t o p pa n e l c o n t r o l s

The BT2 is controlled via a four position button that incorporates two indicator lights

to show the status of the unit at a given time.

p o W e r

The power button controls the power state of the BT2. Press and release the button

and the BT2 will power on and play a single tone to indicate it is switched on. If the

BT2 is switched on, pressing and holding the power button for three seconds will

power the BT2 off again and another tone will play to indicate this.

V o l u m e - / +

The left and right buttons control the volume level of the BT2 between minimum and

maximum levels. When you are listening to the aux input of the BT2, these controls

are the sole point of volume adjustment, if the level of the device connected is fixed.

If the connected device also has a volume control, you should ensure this is set to

maximum and that the volume is controlled on the BT2.

If you are connected to a Bluetooth device, the volume control will function

differently depending on the device you have connected. If you connect an Apple

device, the volume of the BT2 is wholly controlled by the volume of the connected

device. Adjusting the volume on the Apple device will adjust the volume of the BT2

between minimum and maximum.