Acoustic Energy Aego BT2 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Acoustic Energy Aego BT2에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Acoustic Energy Aego BT2 12 페이지. Bluetooth loudspeaker

c o n n e c t I n g t h e B t 2 t o a B l u e t o o t h d e V I c e

- Power the BT2 on and ensure the blue light is flashing; this will either happen

automatically or after pressing and holding the Bluetooth button

- Go to the Bluetooth settings menu of your device. The BT2 should appear in the

list of available devices. If it does not appear, you should refresh it

- Once connected, the BT2 will show a solid blue status light and all audio played

on the device will be played on the BT2

ta k I n g a c a l l o n t h e B t 2

- Ensure your mobile phone is connected to the BT2 as above

- When the phone rings, either press and release the Bluetooth button on the BT2

or accept the call on your mobile to take the call. The microphone is next to the

control pad at the top of the BT2

- To disconnect the call, either hang up on the connected device or press and

release the Bluetooth button

- To reject the incoming call, press the Bluetooth button on the BT2 for a second and

then release it, or reject the call on your mobile

c o n n e c t I n g t W o B t 2 s a s a s t e r e o p a I r

- You will need two BT2s for this process. Ensure both BT2s are turned on and no

more than three metres apart

- Connect to a BT2 via Bluetooth as normal

- On the connected unit press the up and down volume at the same time - you will

hear a beep and the lower indicator light will flash white. Do this for both units

- The BT2s will now function as a stereo pair. The unit you paired your Bluetooth

device to will function as the left channel with the second unit as the right

- Volume can still be controlled via the connected device but the response will be

slightly slower