3DGence ONE Manual de servicio - Página 3
Navegue en línea o descargue pdf Manual de servicio para Impresoras 3D 3DGence ONE. 3DGence ONE 5 páginas. Z-axis limit switch adjustment
También para 3DGence ONE: Manual de inicio rápido (2 páginas)
Imprimir página
Z-AXIS LIMIT SWITCH ADJUSTMENT
3DGence ONE
6
Warm up the heatbed by choosing following commands from printer's menu:
OK
Tune
Temperatures
set the temperature to 75°C and wait 10 minutes to warm up the heatbed and stabilize the temperature.
7
Move the heatbed to the back, move the X-axis rail block to the base position (to the left position)
– in such manner that the hotend does not rise above the heatbed (for safety).
8
Distort the printer by choosing following commands from printer's menu:
OK
Configuration
01.2018
Heatbed
OK
Hardware Test
Home Z.
3DGence ONE | support: +48 32 438 98 64 | www.3dgence.com
2/4