CAME 001CS1PLCO Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Sistema de interfono CAME 001CS1PLCO. CAME 001CS1PLCO 16 páginas. Audio entry kit
También para CAME 001CS1PLCO: Manual de instalación (16 páginas)
Imprimir página
Melody setting
☞ All the programming stages described below must be carried out in sequence:
A x5
A x5
A x5
... beep!
a
A x5
... beep!
c
e
f
h
i
... beep!
... beep!
A x5
... beep!
A x5
... beep!
A x5
... beep!
g
1-Entering programming mode
Lift up the handset and press button A 5 times in 5 seconds.
A short beep confirms that you have entered programming mode a.
2- Programming the melody associated with a call from the entry panel
To listen to the melodies in sequence, press the button .
To select the melody and exit programming, hang up the handset c.
To select the melody and continue with programming, press the
3- Programming the melody associated with a call from the floor
To listen to the melodies in sequence, press button e.
To select the melody and exit programming, hang up the handset f.
To select the melody and continue with programming, press button
4- Programming the number of rings
Press button as many times as you want the call to ring (from 1 to 6 rings) h.
Three seconds after the button is last pressed, the selected call is played back with the
chosen number of rings.
To exit programming, hang up the handset i.
☞ See the entry panel documentation for call programming.
button .
g.