CAME 001CS1PLCO Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Домофонна система CAME 001CS1PLCO. CAME 001CS1PLCO 16 сторінок. Audio entry kit
Також для CAME 001CS1PLCO: Посібник з монтажу (16 сторінок)
Друкувати сторінку
Melody setting
☞ All the programming stages described below must be carried out in sequence:
A x5
A x5
A x5
... beep!
a
A x5
... beep!
c
e
f
h
i
... beep!
... beep!
A x5
... beep!
A x5
... beep!
A x5
... beep!
g
1-Entering programming mode
Lift up the handset and press button A 5 times in 5 seconds.
A short beep confirms that you have entered programming mode a.
2- Programming the melody associated with a call from the entry panel
To listen to the melodies in sequence, press the button .
To select the melody and exit programming, hang up the handset c.
To select the melody and continue with programming, press the
3- Programming the melody associated with a call from the floor
To listen to the melodies in sequence, press button e.
To select the melody and exit programming, hang up the handset f.
To select the melody and continue with programming, press button
4- Programming the number of rings
Press button as many times as you want the call to ring (from 1 to 6 rings) h.
Three seconds after the button is last pressed, the selected call is played back with the
chosen number of rings.
To exit programming, hang up the handset i.
☞ See the entry panel documentation for call programming.
button .
g.