Aeritech ISO Manual de instrucciones de montaje y funcionamiento - Página 2

Navegue en línea o descargue pdf Manual de instrucciones de montaje y funcionamiento para Aviones Aeritech ISO. Aeritech ISO 12 páginas. Design for fpv

Imprimir página
Thank you for purchasing the new ISO plane from Aeritech.
Read this manual carefully to achieve the best results with your ISO plane and first of all to control safely your
model. If you experience any trouble during operation, take the instructions to help or ask your dealer or Aeritech
Service Centre. Due to technical changes, the information maybe changed in this manual without prior notice. Be
always updated by checking periodically for news on our website:
www.aeritech-uav.com
To maintain this condition and to ensure safe operation, you must read and follow this manual and the
safety notes before operating your ISO plane.
Service Centre
Hot line: Tel:86-18626124582，Fax: 86-0512-58198077
General Notice
The ISO plane is powered by a Brushless Outrunner Motor paired with a factory calibrated Electronic Speed
Controller and Servos that control all of the Control Surfaces e.g. Ailerons, Elevator and Rudder; All of which are
factory installed on the PNP version.
Once you have properly assembled your aircraft, in order to fly, you will need to charge the Lithium Polymer
battery using proper safety procedures.
Technical data：
Wing span:2500 mm
Length: 1625 mm
Flying Weight: 2600g
Motor: double 2814 outrunner motor
ESC: double 50A hobby wing
Servo: 9g servo*5,17g servo*2
Prop: 10*7 *2
Biggest battery carrying capacity: 4S 50000mah battery
Heaviest safety take-off weight: 5500g
Default battery: 4S 10000mah