Aeritech ISO Manuale di istruzioni per il montaggio e il funzionamento - Pagina 2

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio e il funzionamento per Aerei Aeritech ISO. Aeritech ISO 12. Design for fpv

Thank you for purchasing the new ISO plane from Aeritech.

Read this manual carefully to achieve the best results with your ISO plane and first of all to control safely your

model. If you experience any trouble during operation, take the instructions to help or ask your dealer or Aeritech

Service Centre. Due to technical changes, the information maybe changed in this manual without prior notice. Be

always updated by checking periodically for news on our website:

www.aeritech-uav.com

To maintain this condition and to ensure safe operation, you must read and follow this manual and the

safety notes before operating your ISO plane.

Service Centre

Hot line: Tel:86-18626124582，Fax: 86-0512-58198077

General Notice

The ISO plane is powered by a Brushless Outrunner Motor paired with a factory calibrated Electronic Speed

Controller and Servos that control all of the Control Surfaces e.g. Ailerons, Elevator and Rudder; All of which are

factory installed on the PNP version.

Once you have properly assembled your aircraft, in order to fly, you will need to charge the Lithium Polymer

battery using proper safety procedures.

Technical data：

Wing span:2500 mm

Length: 1625 mm

Flying Weight: 2600g

Motor: double 2814 outrunner motor

ESC: double 50A hobby wing

Servo: 9g servo*5,17g servo*2

Prop: 10*7 *2

Biggest battery carrying capacity: 4S 50000mah battery

Heaviest safety take-off weight: 5500g

Default battery: 4S 10000mah