Balt 90377 Manual de instrucciones de montaje - Página 7

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Bastidores y soportes Balt 90377. Balt 90377 8 páginas. Wallmount workstation

Imprimir página

Wall Mounting Instructions

Failure to follow these instructions will void your warranty and

For Masonry Walls

Screw

Plastic

Anchor

1.) Predrill the correct diameter predrill

in the wall with a masonry drill bit.

2.) Tap in the plastic anchor

3.) Attach the unit to the wall with the .

correct length screw

Snaptoggle

Anchor

1.)

Drill a 1/2" diameter hole in the sheetrock.

2.)

Insert the Snaptoggle anchor into the 1/2" hole. Hold ends of straps together and pull toward you

until channel rests behind wall. Ratchet cap along straps until cap is flush with wall.

3.)

Push thumb side to side to snap off straps level with flange of cap.

4.)

Place unit over flange and insert bolt that came with the Snaptoggle and tighten bolt.

could result in injury.

Use the correct wall

predrill for your

Plastic Anchor

For Sheetrock Walls

1/2"

Hole

For Wood Stud Walls

Wood Stud

2"-3" Lag

Screw

1.) Predrill a 1/8" hole in the through the

wall surface and into the wood stud.

2.) Attach the unit to the wall with a 2"-3"

Lag Screw.

1/8"

Predrill

Snaptoggle

Anchor in set

position

Bolt

2-15-13