ESI FLEX2-BLK Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Mobiliario interior ESI FLEX2-BLK. ESI FLEX2-BLK 12 páginas. Electric table base

ASSEMBLY

STEP 1

With the table top facing down on a soft, clean surface,

arrange the frame and leg columns as shown.

• The mounting tabs on the frame face down so that

they are against the work surface.

• The leg columns should be spaced so that the

columns are about the same distance apart as

the openings on the frame.

STEP 2

Lower the frame over the leg columns.

• The long notches in the cross channel fit

over the holes on the cord side of the

leg column base.

STEP 3

Route the motor cables under the notches

near the center of the frame.

STEP 4

Prepare the frame so that it can be

expanded.

• Remove the four machine screws from

the center of the cross channel using the 4mm Allen

key. Save the screws for re-installation later.

• Loosen the two set screws on the rear of the frame using

the 6mm Allen key. Do not remove the set screws.

Align Long Notches

in Cross Channel with

Holes in Base of Leg

Route Motor

Cables Under

Notches

ALL-FLEX

ELECTRIC TABLE BASE

™

Space

Leg Columns

to Match

Openings

in Frame

Front

Frame

Loosen

Remove

Leg

Column