Alto-Shaam HALO HEAT 200-HST/G Instalación Funcionamiento y mantenimiento - Página 4

Navegue en línea o descargue pdf Instalación Funcionamiento y mantenimiento para Comerciante Alto-Shaam HALO HEAT 200-HST/G. Alto-Shaam HALO HEAT 200-HST/G 15 páginas. Hot food shelf with granite insert
También para Alto-Shaam HALO HEAT 200-HST/G: Hoja de especificaciones (2 páginas)

Imprimir página

S I T E I N S TA L L AT I O N

The heated shelf, complete with unattached items

and accessories, should be checked to ensure all the

ordered items have been received with the unit.

The heated solid surface material insert will come

in a separate shipment, or could be ordered by the

customer from a source other than Alto-Shaam.

Alto-Shaam hot shelves are designed for the

purpose of maintaining hot food at a temperature for

safe consumption. The unit must be installed on a

level surface in a location that will permit the

equipment to function for its intended purpose and

allow adequate access for proper cleaning and

maintenance.

The appliance must not be installed in any area

where it will be affected by steam, grease, dripping

water, high temperatures, or any other severely

adverse conditions.

HEATED SOLID SURFACE INSERT:

The solid surface material insert must be

1/2" to 1" (12.5mm to 25mm) thick. It must be sealed

with NSF listed silicone to close the gap between the

well and the insert. Follow the manufacturer 's

instructions for installation, maintenance, and

cleaning.

In most cases a granite insert will be the heat

source for this hot food shelf. A sealed granite insert

provides even heat transfer to hot food being held in

direct contact with the granite top. This granite must

be properly sealed so hot pans will not cause damage,

scratches, staining and blistering due to heat. Always

follow manufacturer 's instructions for its care.

A cutting board is recommended on this surface.

The use of a stone sealer will help the stone become

less porous.

Level the appliance from side-to-side and front-to-

back with the use of a spirit level.

OPENING REQUIRED FOR DROP-IN

APPLICATION:

43" L x 24-1/16" W (1093mm x 611mm)

I N S TA L L AT I O N

# 8 1 4 I N S TA L L AT I O N / O P E R AT I O N / S E RV I C E M A N U A L • 3.

U S E R S A F E T Y I N F O R M AT I O N

IMPROPER INSTALLATION, ALTERATION,

ADJUSTMENT, SERVICE OR MAINTENANCE

COULD RESULT IN SEVERE INJURY, DEATH

OR CAUSE PROPERTY DAMAGE.

This appliance is intended for use in commercial

establishments by qualified personnel who are

familiar with the purpose, limitations, and associated

hazards of this appliance. Operating instructions and

warnings must be read and understood by all

operators and users.

BEFORE USE:

Before operating the unit, clean with a clean,

damp cloth and mild soap solution. Rinse surface by

wiping with a clean sponge and clean warm water.

Remove excess water with sponge and wipe dry with

a clean cloth or air dry.

P R O D U C T C A PA C I T Y

36 lb (16 kg)

WEIGHT (

WITHOUT INSERT

NET

SHIP

C R A T E

D I M E N S I O N S

TO PREVENT PERSONAL INJURY,

USE CAUTION WHEN MOVING OR

LEVELING THIS APPLIANCE.

MAXIMUM

)

89 lb (40 kg)

112 lb (51 kg)

22"

48"

38"

(559mm x 1245mm x 965mm)