Akiyama K2 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ Akiyama K2. Akiyama K2 7 páginas.
Imprimir páginaKURO / K2. User Manual Cross 2.4
15. HOT CUES / SAMPLES
These buttons allow the user to create and use up to 4 location
points in the track. To store a location point, simply move to
the position on the track that you want to mark and press the
desired locator. To jump to a location point, simply click on the
relevant location point number.
To load samples we must activate the sample mode (14).
When sample mode is active (red led). We can choose
between 4 samples. Buttons 1 to 4 act as PLAY/STOP.
-If sample it is empty, sample is loaded form deck.
To delete this locators hold SHIFT button (23) and press the
"LOCATOR (1, 2, 3 or 4) you want to delete.
Note: To delete samples, they must be stopped.
16. SAMPLE MODE
Activate or deactivate SAMPLES mode.
17. FINE BEND
Range +0,01% and -0.01%
Shift= (Confirm / Discard Tap). When you analyse a track,
Cross will detect the BPM. If you are not happy with this BPM
you can change it by using the TAP tempo.
1. Tap on the tap tempo button (16)
2. When you think that the BPM showed by Cross is OK, stop
tapping.
3. After a few seconds, Cross proposes to confirm the new
BPM (a 'OK' button under the new BPM appears).
4. If you think that this BPM is OK, you need to confirm it by
pushing on the Confirm button (shift + left button).
5. If you think that this BPM is wrong, you need to discard it by
pushing on the Discard button (shift + right nutton).
18. TAP
Within Manual TAP Mode, you have to press at least three
times this button to fix the Beat you want.
19. SCRATCH / PITCH BEND /SEEK MOVE
A- SCRATCH: To make SCRATCH, please make sure you
that VINYL MODE (19) is activated. To obtain a good
SCRATCH response we recommend you a 896 samples
latency (20,3ms). CROSS: File/Preferences/audio
B- PITCH BEND: The Jog Wheel is the default CD mode,
which means that if the move forward or backward the wheel, it
changes the playback speed. It is called Pitch Bend because
by failing to manipulate the wheel, pitch is returned
automatically to the normal play or pitch 0%.
C- SEEK MOVE: We have already explained it in (5) and (7).
You can move the playback point across the song pressing
SHIFT (23) and moving the Jog Wheel (wheel).
20. PITCH SLIDER
It is used to determine the percentage of pitch of the song in a
defined range. The software display shows the percentage of
Pitch applied. The pitch ranges available are 4%, 6%, 8%,
16%, 32%, 100% and you can select them pressing the button
PITCH RANGE (21).
21. VINYL MODE
Pressing this button the Vinyl LED will light and this will
indicate us we are in Vinyl mode (SCRATCH). The software
SCREEN also illuminate VINYL icon.
To exit Vinyl mode and access to CD mode, we must press the
button again. We will see that on the player the Led Software
CDJ is enabled and CD mode is active in the software.
22. PITCH MODE
With this button we select the type of mode we want to pitch.
We can choose between HYBRID, SPEED and TEMPO. On
the software Screen will reflect the way we are.
23. PITCH RANGE
The available pitch range is 4%, 6%, 8%, 16%, 32%, 100%. As
you press this button, the pitch range will change from low to
high.
24. AUTO LOOP
Pressing this button will activate the Auto Loop. The LED on
the player KURO & K2 will light.
Once selected AUTOLOOP function, we can manipulate the
length of the Loop with the AUTO LOOP LENGTH (24),
explained further on.
25. SHIFT
This button is what we call a "wildcard". It allows us to select
second functions on the player. All functions that depend on
this button (SHIFT) are explained in their respective points.
4