ClearOne MAX WIRELESS Manual de instalación y funcionamiento - Página 5
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Teléfono de conferencia ClearOne MAX WIRELESS. ClearOne MAX WIRELESS 11 páginas. Clearone conference phones specification sheet
También para ClearOne MAX WIRELESS: Ficha de datos (2 páginas), Hoja de especificaciones (3 páginas), Folleto (1 páginas), Folleto (2 páginas)
Imprimir página
6
Connecting to a digital phone line
If you have digital (PBX) telephone service, you will need a digital-to-analog tele-
phone line converter. For more information, contact ClearOne technical support.
Electrical
Outlet
AC Adapter
Base Unit
Figure 5. Connecting the base unit to digital-to-analog converter
1. Connect one end of the telephone cable into the phone jack on the back of the
base unit and the other end into the digital-to-analog converter.
2. Connect the converter's power adapter into an electrical outlet.
3. Connect a second telephone cable from the converter to a digital or PBX
phone. Consult the converter user manual for more information.
4. Plug the base unit into an electrical outlet. The base unit may be located up
to 150 feet/45.7 meters from the conferencing pod.
Using your Max Wireless conferencing phone
To make a call
1. Press the
key. You will hear a dial tone.
ON/OFF
2. Dial the number as you would on a standard phone. The number is displayed
on the LCD screen.
Phone icon
Call timer
Figure 6. LCD screens
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Getting Started
Phone Jack
Digital, PBX,
or Multi-line phone
KONEXX KONFERENCE
Digital-to-Analog
Converter
Handset
Approximate
talk-time remaining
Getting Started
You can also predial the number while in Standby (inactive) mode and press the
ON/OFF key to connect the call. Press and hold the pound key (#) to enter a pause in
the dialing string.
Elapsed time is shown in minutes and seconds until one hour passes.Then elapsed
time is shown in hours and minutes.
To answer a call
• Press any key (except the star "*" key,
) on the keypad to answer the call. When there is an incoming call, the
DOWN
phone rings and the LEDs on the phone and the phone icon on the LCD
screen flash.
Phone icon
Figure 7. Incoming call
To end a call
• Press the
key. This will disconnect the call and return the phone to
ON/OFF
Standby mode.
To redial a number
1. Press the
key. You will hear a dial tone.
ON/OFF
2. Press
to dial the last number called.
REDIAL
You can also press REDIAL while in Standby mode to display the last number called.
To connect the call, press the ON/OFF key.
To adjust ringer volume
• While the phone is ringing, press
VOLUME UP
• While the phone is inactive, press
VOLUME UP
melody will play once at the new level.
To mute the call
• Press
to mute the call.
MUTE
• Press again to unmute.
To make a call using the Phonebook
1. Press the
key. You will hear a dial tone.
ON/OFF
2. Press
.
PHONEBOOK
3. Press the number key (
) that corresponds with the location of the stored
0-9
phone number you want to dial. This feature must be programmed before use.
See page 8.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
7
,
or
MUTE
VOLUME UP
VOLUME
or
.
VOLUME DOWN
or
. The ringer
VOLUME DOWN