ClearView PowerBoards PB-TA-006 Manual de instrucciones de instalación - Página 9
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Accesorios para automóviles ClearView PowerBoards PB-TA-006. ClearView PowerBoards PB-TA-006 18 páginas. Toyota landcruiser 300 series 2022-current
Imprimir páginaFitting Instructions
Step 2
Installing control unit and wiring
2.1 Mount control unit in the passenger kick
panel area.
The control unit should not be placed in
the vehicle engine bay, as exposure to
heat and moisture may cause damage to
the unit.
2.2 Connect the motor wire harness (small
white power plug) and sensor wire harness
(large white plug) to the control unit.
Once connectors are plugged in, leave in
Left-Hand floor area, tidy up at the end.
2.3 Connect the negative (black) wire from the
motor wire harness to a ground point on the
passenger side of the chassis, near where the
control unit is mounted.
Connect the
positive wire
corresponding connector found on the motor
wire harness.
from Step 1.4 to the
clearviewaccessories.com.au
Sensor Wire Harness
Motor Wire Harness
Positive Wire
Negative Wire
9