Arthur Grillo DPC200 Manual de instalación y funcionamiento - Página 6
Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Controlador Arthur Grillo DPC200. Arthur Grillo DPC200 14 páginas. Differential pressure controller, low pressure sensor with pi-control-mode
También para Arthur Grillo DPC200: Manual de instalación y funcionamiento (16 páginas), Manual (7 páginas)
Imprimir página
INSTALLATION
3.
Installation
The differential pressure controller DPC200 is designed for wall mounting.
•
The mounting surface must be solid enough and vibration-free.
•
The environment has to fulfill the ambient climatic conditions as given in the technical
data.
CAUTION
NOTICE
3.1 Dimensions
All dimensions in inches.
3.2 Wall mounting
1.
Hold the DPC200 against the wall. Mark the mounting holes.
2.
Drill mounting holes for properly sized screws.
3.
Put the screws through the housing mounting holes.
4.
Tighten screws.
6
Material damage
Read the manual carefully before installation and operation
Only experienced staff may connect the device and bring it into
operation.
•
The device is position depended.
•
The DPC200 must be mounted vertically.
Doc.-no.: DPC200_04_EBM_US
Issue: 06/2018