Arthur Grillo DPC200 설치 및 운영 매뉴얼 - 페이지 6

{카테고리_이름} Arthur Grillo DPC200에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Arthur Grillo DPC200 14 페이지. Differential pressure controller, low pressure sensor with pi-control-mode
Arthur Grillo DPC200에 대해서도 마찬가지입니다: 설치 및 운영 매뉴얼 (16 페이지), 매뉴얼 (7 페이지)

페이지 인쇄
Arthur Grillo DPC200 설치 및 운영 매뉴얼

INSTALLATION

3.
Installation
The differential pressure controller DPC200 is designed for wall mounting.
•
The mounting surface must be solid enough and vibration-free.
•
The environment has to fulfill the ambient climatic conditions as given in the technical
data.
CAUTION
NOTICE

3.1 Dimensions

All dimensions in inches.

3.2 Wall mounting

1.
Hold the DPC200 against the wall. Mark the mounting holes.
2.
Drill mounting holes for properly sized screws.
3.
Put the screws through the housing mounting holes.
4.
Tighten screws.
6
Material damage
Read the manual carefully before installation and operation
Only experienced staff may connect the device and bring it into
operation.
•
The device is position depended.
•
The DPC200 must be mounted vertically.
Doc.-no.: DPC200_04_EBM_US
Issue: 06/2018