ARTHUR HOLM DB1Twin Instrucciones de montaje - Página 14

Navegue en línea o descargue pdf Instrucciones de montaje para Monitor ARTHUR HOLM DB1Twin. ARTHUR HOLM DB1Twin 16 páginas.

OPTION 3

- Veneer material can't be conductor.

1. Check if the Veneer fits perfectly with the monitor. To join both parts correctly it is important that the two surfaces

are touching each other in the whole length. If there is a gap between the Veneer and the monitor, check if the hole

depth in the Veneer is correct. (To make easier the adjustment the hight of the copper cylinder can be barely

adjusted.)

2. Clean the top surface of the metal monitor housing and the

bottom surface of the Veneer.

3. Glue the Veneer. Double-side tape or glue can be used

(depending on the kind of materials are going to be jointed).

Double-side tape or glue used can't be thicker than 0,2-

0,25mm [0.008-0.01]

Veneer Guide (Optional)

The pressure applied

must not exceed 1 Kg

evenly distributed on

monitor surface.