ARTHUR HOLM DB1Twin Instrucciones de montaje - Página 12

Navegue en línea o descargue pdf Instrucciones de montaje para Monitor ARTHUR HOLM DB1Twin. ARTHUR HOLM DB1Twin 16 páginas.

OPTION 2

- Distance Plate material can't be conductor. Wood or DM are advisable.

- Veneer material can't be conductor.

1. Check if the Distance Plate fits perfectly with the monitor. The copper

cylinder can't project outwards from the Distance Plate surface. (To

make easier the adjustment the hight of the copper cylinder can be

barely adjusted.)

2. Clean the top surface of the metal monitor housing and the bottom

surface of the Distance Plate.

3. Glue the Distance Plate. Double-side tape or glue can be used

(depending on the kind of materials are going to be jointed). Double-

side tape or glue used can't be thicker than 0,2-0,25mm [0.008-0.01]

INFORMATION

Veneer Guide (Optional)

4. Clean the top surface of the Distance Plate and the bottom

surface of the Veneer.

5. Glue the Veneer. Double-side tape or glue can be used

(depending on the kind of materials are going to be joint).

The total thickness of Veneer + glue used can't be thicker than

1mm [0.04].

The pressure applied

must not exceed 1 Kg

evenly distributed on

monitor surface.