ARTHUR HOLM DB1Twin Petunjuk Pemasangan - Halaman 12
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Monitor ARTHUR HOLM DB1Twin. ARTHUR HOLM DB1Twin 16 halaman.
OPTION 2
- Distance Plate material can't be conductor. Wood or DM are advisable.
- Veneer material can't be conductor.
1. Check if the Distance Plate fits perfectly with the monitor. The copper
cylinder can't project outwards from the Distance Plate surface. (To
make easier the adjustment the hight of the copper cylinder can be
barely adjusted.)
2. Clean the top surface of the metal monitor housing and the bottom
surface of the Distance Plate.
3. Glue the Distance Plate. Double-side tape or glue can be used
(depending on the kind of materials are going to be jointed). Double-
side tape or glue used can't be thicker than 0,2-0,25mm [0.008-0.01]
INFORMATION
Veneer Guide (Optional)
4. Clean the top surface of the Distance Plate and the bottom
surface of the Veneer.
5. Glue the Veneer. Double-side tape or glue can be used
(depending on the kind of materials are going to be joint).
The total thickness of Veneer + glue used can't be thicker than
1mm [0.04].
The pressure applied
must not exceed 1 Kg
evenly distributed on
monitor surface.
12