EDIFIER S2000v Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Sistema de altavoces EDIFIER S2000v. EDIFIER S2000v 6 páginas.
Imprimir página
How to place the speakers:
This product is designed to be used on bookshelves or desktops. Please leave at least 1.5 meters
between the two speakers. For best results, keep a 1 meter distance or more away from the
speakers when listening.
Connecting to a sound source:
How to connect the speakers:
Connect the line controller cable plug into
Connect one end of the speaker cable to the line out
the dedicated socket, and then connect
sockets on the back of the active speaker, and the
the audio cable with the RCA plugs into
other end to the line-in sockets on the back of the
the RCA input sockets on the rear of the
non-active speaker. To ensure correct phase, be sure
active speaker. The 3.5mm jack plug may
to match red to red and black to black terminal
be plugged into a soundcard, Discman,
connectors. Please see the illustration figure for
or game console etc. Various
details. Do not shorten the speaker cables. Make
combinations of adapters will allow
sure the connections are tight and that there are no
different source hookups for special
short circuits across the terminals. The quality of the
purposes. Adjust the Volume control (or
speaker cables might affect the overall sound quality,
line controller if connected) to a
which the speakers produce. The use of Oxygen-free
comfortable listening level. When the line
copper (OFC) cables or other high quality cables as
control is plugged in, the volume control
an option, are highly recommended.
knob on the back panel of the active
Connecting to the power:
speaker is deactivated.
After correctly connecting the speakers and audio
source, plug in the power supply. Please make sure
the local electricity voltage is correct for this product.
Please keep the power switch on the rear of the active
speaker switched to OFF when plugging into the
power outlet.
How to place and
connect speakers:
Diagram Nomenclature List:
Rear View of
Front View of
Non-active Speaker
Non-active Speaker
1 Non-active speaker
7 Bass port
2 Active speaker
8 3.5 mm Headphone Plug
3 Tweeter
/RCA Plug Audio cable
4 Front cover
9 Speaker cable
5 Bass driver
10 Line controller
6 Speaker input socket
11 User manual and warranty card
Rear View of
Active Speaker